For screen reader problems with this website, please call805-527-21888 0 5 5 2 7 2 1 8 8Standard carrier rates apply to texts.

Visions Audio Video

Visions Audio Video

805-527-2188

Crestron® 4 Channel High-Inrush Switch Module

Model #: GL-CAEN-4HSW4 KIT

At a Glance

CreCrestron® 4 Channel High-Inrush Switch Module with terminal block and 4 feeds

WarningProposition 65 Warning for California Residents
Crestron® 4 Channel High-Inrush Switch Module

General Specs

Product Weight (lbs.)3
Width (in.)6.92
Depth (in.)3.43
Height (in.)7.59

Crestron® 4 Channel High-Inrush Switch Module

Model #: GL-CAEN-4HSW4 KIT
172681
Model #: GL-CAEN-4HSW4 KIT
Crestron
$99,999.00

Call for Best Price

At a Glance

CreCrestron® 4 Channel High-Inrush Switch Module with terminal block and 4 feeds

Get to know this product.

Provides four channels of switching for commercial lighting applications. Supports a full range of high-inrush, non-dimmable lighting loads. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system.

The Crestron® GL-CAEN-4HSW4 is a four-channel, four-feed switch module designed for 120V commercial lighting system applications. It installs in a CAEN or CAEN-MLO enclosure and provides control of non-dimmable lighting loads including LED, incandescent, fluorescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, and high-intensity discharge. It can also be used to switch motor loads. Individual feed capability provides four independent single-channel switches in one module space. Each channel is rated for 16 Amps, with a total module rating of 64 Amps when fed from four separate 20 Amp feeds.

Air-Gap Relays

    An air-gap relay on each channel output allows individual circuits to be serviced without disabling the entire module.

Silent Operation

    Low-maintenance convection cooling with over-sized heatsinks affords silent operation with no mechanical components to wear out.

Emergency Lighting Control

    The GL-CAEN-4HSW4 is UL® 924 and CSA® C22.2 No. 141-15 listed for use in controlling emergency lighting loads. In the event of a power failure, a contact closure from a power loss sensor (Crestron GLS-PLS-120/277, sold separately) activates the override mode in the GL-CAEN-4HSW4 to turn on each designated lighting load if it is off (assuming line power is supplied by a backup power source).

Centralized Lighting Cabinet Installation

    Crestron GL-CAEN series commercial lighting control modules are designed to be installed in a CAEN or CAEN-MLO wall mount enclosure. Available in a variety of sizes, CAEN and CAEN-MLO enclosures provide a scalable, high-density centralized lighting control solution for any-sized commercial building or facility. A selection of GL-CAEN module types is offered to accommodate a wide range of load types and system configurations.

    Each lighting control module, including the GL-CAEN-4HSW4, ships complete with a DIN rail terminal block for termination of the high-voltage feed and load wiring. This terminal block mounts beside the module within the enclosure. Low-voltage control signals are bussed between each of the modules within an enclosure via a simple 5-wire link (interconnect jumpers included), which terminates to a single terminal block (model CAEN-BLOCK, sold separately) at the bottom of the enclosure.

Cresnet® Communications

    The GL-CAEN-4HSW4 interfaces with a Crestron control system (a.k.a., control processor or automation processor) via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.

Key Features

    Four-channel high-inrush switch module for commercial lighting applications

    Installs in a Crestron® CAEN or CAEN-MLO enclosure

    Supports on/off switching of LED, incandescent, fluorescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, and high-intensity discharge lighting loads

    Also supports on/off switching of 1/2 HP motor loads

    Individual feed inputs per channel

    Rated 16 Amps per channel, 64 Amps total (using four 20 Amp feeds), at 120 Volts AC

    Built-in air gap relay per channel

    Convection cooled for silent operation

    Closure-activated override mode

    UL® 924 and CSA® C22.2 No. 141-15 listed for emergency lighting control

    Crestron system integration via Cresnet®

    Includes terminal block for high-voltage wiring

    CEC Title 24 2013 compliant

Useful Documents
Specifications

General Specs

Product Weight (lbs.)3
Width (in.)6.92
Depth (in.)3.43
Height (in.)7.59
WarningProposition 65 Warning for California Residents