For screen reader problems with this website, please call805-527-21888 0 5 5 2 7 2 1 8 8Standard carrier rates apply to texts.

Visions Audio Video

Visions Audio Video

805-527-2188

Crestron® Green Light® 0-10V Dimmer Expansion Module

Model #: GL-EXP-DIMFLV-CN

At a Glance

Crestron® Green Light® 0-10V Dimmer Expansion Module with emergency lighting control and built-in air gap relay

WarningProposition 65 Warning for California Residents
Crestron® Green Light® 0-10V Dimmer Expansion Module

General Specs

Product Weight (lbs.)3.43
Width (in.)6.39
Depth (in.)3.16
Height (in.)8.78

Crestron® Green Light® 0-10V Dimmer Expansion Module

Model #: GL-EXP-DIMFLV-CN
171974
Model #: GL-EXP-DIMFLV-CN
Crestron
$99,999.00

Call for Best Price

At a Glance

Crestron® Green Light® 0-10V Dimmer Expansion Module with emergency lighting control and built-in air gap relay

Get to know this product.

A single-channel dimmer module controlled by Cresnet®. Supports 0-10V dimmable LED drivers and fluorescent ballasts. UL® 924 listed for emergency lighting control applications.

The Crestron Green Light® GL-EXP Series delivers a family of professional lighting control modules for Cresnet® or DALI® based lighting systems. Designed for easy installation on a wall or above a suspended ceiling, these modules offer a perfect solution for adding extra lighting zones to any system without requiring an additional lighting cabinet.The GL-EXP-DIMFLV-CN is a single-channel dimmer expansion module designed to control 0-10 Volt dimmable fluorescent ballasts and LED drivers. It can also be used to switch non-dimmable lighting and motor loads.

Cresnet® Communications

    The GL-EXP-DIMFLV-CN interfaces with a Crestron® control system via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron lighting dimmers, switches, keypads, shades, thermostats, and other devices.

Emergency Lighting Control

    The GL-EXP-DIMFLV-CN is UL® 924 listed for use in controlling an emergency lighting load. In the event of a power failure, a contact closure from a power loss sensor (Crestron GLS-PLS-120/277, sold separately) activates the override mode in the GL-EXP-DIMFLV-CN to turn on the lighting load if it is off (assuming line power is supplied by a backup power source). The override dimming level can be preset to any value when commissioning the lighting system, so even if the load is already on prior to a power failure, it will change to the preset level when override mode is activated.

Plenum Rated NEMA Enclosure

    The GL-EXP-DIMFLV-CN is designed to be mounted to a vertical surface and is UL 2043 compliant to allow for installation in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.

Key Features

    Single-channel 0-10 Volt lighting dimmer

    Crestron® system integration via Cresnet®

    Supports 0-10V dimmable fluorescent ballasts and LED drivers

    Also supports on/off switching of non-dimmable lighting and motor loads

    Rated 16 Amps at 100-277 Volts AC

    Built-in air gap relay

    Closure-activated override mode

    UL® 924 listed for emergency lighting control

    Surface mountable NEMA Type 1 enclosure

    Mounts on a wall panel or above a suspended ceiling

    UL 2043 listed for installation in an environmental air handling space

Specifications

General Specs

Product Weight (lbs.)3.43
Width (in.)6.39
Depth (in.)3.16
Height (in.)8.78
WarningProposition 65 Warning for California Residents